Profile_small

Learn How To Keep Your Furnace Operating At Peak Performance

Your furnace is one of those household components that needs the occasional cleaning and tune up to keep it running at top performance. We suggest you write out a maintenance schedule for all that needs attention in your place, beginning with the furnace. We've planned out a few ideas for furnace maintenance you can track below.

1. Air Filters

The heating system air filter is your first line of defence against floating contaminants like allergens and other irritating particles. These are cheap and easy to exchange. If you make use of the inexpensive everyday filters like a good number of us you will want to change it every three months to help the furnace run better.

2. Keeping The Furnace Clean

Turn everything off and let it cool down. Summer season is best for this job as it's off anyway. Open the furnace door to look at the heat fins and the base of the furnace. There will be dust and possibly rust if it has been a long time since it was vacuumed. A wire brush will deal with the rust and your house vacuum will be fine for getting the dust out.

3. Tension Belts

Over time the tension belt will slacken and you will possibly hear it rattling There's a good chance the tension belt needs tightening or exchanging.

4. Oil The Motor

The furnace motor requires oiling once a year. Neglecting to do that is asking for problems when a few drops of oil can easily deal with it.

5. The Pilot Light

The pilot light is required for the furnace to work. If you can't see the flame at the bottom, then odds are good the pilot light has died. It should burn a deep blue color, but if it isn't burning that color then it is likely time for a tune up. If you can't get the pilot light to ignite then call up a local plumber for assistance.

6. Thermostat Control

Do a little check to see if the thermostat is functioning properly. Old skool thermostats use mercury to flip the switch. To test those kinds make sure that the room is still and take off the cover. Move the lever and watch for a very small spark, or listen to hear if the furnace turns on. With digital thermostats you'll see what's going on by looking at the display.

7. Heat Vents

Test to see that the vents are not blocked. Most vents are custom built but all have the identical purpose. If the vents need cleaning, the workers generally cut a hole in the core stack to set up the equipment. Do not do this yourself if you don't have the right equipment to seal the hole. If your ventilation has never been checked and five years has gone by, then it's time to have them examined. Unclean vents are generally the cause of illness in the home. Over the years stuff like airborne dirt and dust, spider webs, mouse droppings and things lost down the vent cause a serious mess and ought to be professionally removed for health factors.

8. Gas Leakage

If there is a gas leak you can notice it. If you are able to smell rotten eggs that would be mercaptan, which stinks and is there for safety reasons. So in case you smell rotten eggs, then be quick and leave the building immediately and then call for help later. If it comes to mind leave the doors and windows open. Don't call from inside your home! Do not smoke or strike a match, don't activate anything electrical or use some ignition source. Doing so could ignite the fumes. Once outside, go to the nearest phone and call 911 for help. check it out

Tags: